Back to Custom Guns
AR-15 Rifles
Target Rifles
varmint Rifles
Hunting
Rifles Tactical Rifles
SAIGA Shotguns
Single Shot Rifles
pistols
Hershey Centennial
NFA Short
barreled Shotguns
Back To Ar Rifles hOME
RAPTR Gen.2 18"
Carbon Fiber Barrel
New for 2016 HGC is offering our Raptr with a
Non-Reciprocating Left Side Charging Handle & KeyMod Handguard. See
Specs. below.
Click on Thumbnail for a better view.
HGC Side Charge
Features
Operation
of the charging handle can be done with the shooter's supporting
hand, while the weapon is still shouldered. This allows the operator
to maintain a good cheek weld and on-target sight picture.
A simple
rearward pull of the charging handle will work the action, but once
charged, the handle stays locked forward while the action cycles.
The shooter doesn’t have to worry about the handle impacting their
hand, their cover, or barriers during operation.
Ideal scope
position is often compromised on rifles with a traditional charging
handle. In many cases, optics must be installed higher and/or
further forward so their objective lens won’t interfere with the
operation of a rear charging handle. The side charge upper design
allows a shooter to have their scope installed as low and far back
as preferred with more options on usable mounts/rings
|
Specifications |
|
HGC Billet Lower
Type 3 Hard Coat Anodized |
Checkering on front of Mag. Well |
A3
Billet Left Side Charge Upper
Type 3 Hard Coat Anodized |
Christensen 18"
Carbon Fiber
1x10 Twist Barrel |
Chambered
.308 Win. |
Lo-Profile
.936
Gas Block |
9310
Nitride
Steel Bolt Carrier |
8620
Nitride Steel Bolt |
Elftmann Match
Trigger 2-1/2lb. |
Luthar Adjustable Stock |
Odin
15.5" KeyMod Handguard (Not Shown 12.5" Pictured) |
Hogue Grip |
M2-72 Muzzle Brake |
Flip Sights |
Adj. Bipod |
1 - 3" KeyMod Rail
Section |
1-25 rd. Magpul P Mag w/ window |
1-1/4" Sling Swivel |
1-1/4" Black Nylon
Sling |
Black Nylon
Tactical Soft Case |
Cerakote
Coyote Tan & Black Finish |
Weight
8.4 lbs.
Price: $2895.00
(Price
subject to change without notice)
Elftmann AR10 Needle
Bearing Trigger
|
HGC Side Charge
Features
The side charge
handle is also very easy to operate while in prone or other tactical
shooting positions, all the while maintaining a good cheek weld and
on-target sight picture.
By keeping a static non-folding
handle, it is much less likely to get snagged in a MOLLE strap, and
its blunt shape reduces the pressure on the operator should they
come into more forceful contact with the handle.
In the event of a malfunction,
like a stuck case, the charging handle can handle whatever force is
needed to quickly clear the rifle. And, in many cases, the forward
mounting of the handle allows the shooter to keep the rifle
shouldered and on target while being able to exert a great deal of
force, if needed, to clear their weapon.
The rear access door and charging
handle slide cover were designed to keep operating gasses inside the
firearm.
When shooting suppressed, operator exposure to the increased back
pressure gasses are significantly reduced. |
Options |
Proof Research
Carbon Fiber Barrels |
Calibers : 6.5
Creedmore |
RAPTR Gen.2 18"
SS Bull
Fluted
New for 2016 HGC is offering our Raptr
with a Non-Reciprocating Left Side Charging Handle See
Above Features.
Click on Thumbnail for a better view.
HGC Side Charge
Features
Operation
of the charging handle can be done with the shooter's supporting
hand, while the weapon is still shouldered. This allows the operator
to maintain a good cheek weld and on-target sight picture.
A simple
rearward pull of the charging handle will work the action, but once
charged, the handle stays locked forward while the action cycles.
The shooter doesn’t have to worry about the handle impacting their
hand, their cover, or barriers during operation.
Ideal scope
position is often compromised on rifles with a traditional charging
handle. In many cases, optics must be installed higher and/or
further forward so their objective lens won’t interfere with the
operation of a rear charging handle. The side charge upper design
allows a shooter to have their scope installed as low and far back
as preferred with more options on usable mounts/rings
|
Specifications |
|
HGC Billet Lower
Type 3 Hard Coat Anodized |
Checkering on front of Mag. Well |
A3
Billet Left Side Charge Upper
Type 3 Hard Coat Anodized |
18" SS
Fluted Bull
1x10 Twist Barrel |
Chambered
.308 Win. |
Lo-Profile
.936
Gas Block |
9310
Nitride
Steel Bolt Carrier |
8620
Nitride Steel Bolt |
Elftmann Match
Trigger 2-1/2lb. |
MagPul PRS
Stock |
KeyMod 12.5"
Handguard |
Hogue Grip |
M2-72 Muzzle Brake |
Flip Sights |
Adj. Bipod |
1 - 3" KeyMod Rail
Section |
1-25 rd. Magpul P Mag w/ window |
1-1/4" Sling Swivel |
1-1/4" Black Nylon
Sling |
Black Nylon
Tactical Soft Case |
Cerakote
Coyote Tan & Black Finish |
Weight
10 lbs.
Price: $2500.00
(Price
subject to change without notice)
Elftmann AR10 Needle
Bearing Trigger
|
HGC Side Charge
Features
The side charge
handle is also very easy to operate while in prone or other tactical
shooting positions, all the while maintaining a good cheek weld and
on-target sight picture.
By keeping a static non-folding
handle, it is much less likely to get snagged in a MOLLE strap, and
its blunt shape reduces the pressure on the operator should they
come into more forceful contact with the handle.
In the event of a malfunction,
like a stuck case, the charging handle can handle whatever force is
needed to quickly clear the rifle. And, in many cases, the forward
mounting of the handle allows the shooter to keep the rifle
shouldered and on target while being able to exert a great deal of
force, if needed, to clear their weapon.
The rear access door and charging
handle slide cover were designed to keep operating gasses inside the
firearm.
When shooting suppressed, operator exposure to the increased back
pressure gasses are significantly reduced. |
Options |
Calibers : 6.5
Creedmore |
|
H.G.C. AR08 Recon 16" HBAR
Standard A3 Upper Receiver
Click on Thumbnail for a better view.
Specifications |
HGC Billet Lower
Type 3 Hard Coat Anodized |
Checkering on front of Mag. Well |
HGC A3 Billet Upper
Type 3 Hard Coat Anodized |
16" HBAR
1x10 Twist Threaded 5/8x24 Barrel |
Chambered to
.308 |
Lo-Profile
.936
Gas Block |
9310 Nitride
Steel Bolt Carrier |
8620 Nitride Steel Bolt, |
Std. Mil-Spec
Trigger |
6 Position
Collapsible Stock |
KeyMod 12.5"
Handguard |
Flash
Suppressor |
Flip Sights |
1-25 rd. Magpul P Mag w/ window |
1 - 3" KeyMod Rail
Section |
QD 1/4" Sling
Swivel |
1-1/4" Black Nylon
Sling |
Black Nylon
Tactical Soft Case |
Cerakote
Coyote Tan & Black Finish |
Weight
8.5 lbs.
Price: $1675.00
(Price subject to
change without notice)
|