UP
Pistolsmithing Shotgunsmithing
Riflesmithing
General Work
Description |
Price |
| Minimum Charge per Job (Unless
stated otherwise) |
$25.00 |
| Clean & Oil Rifle (Complete
DisAssy. & Checking for wear) |
$25.00 |
| Bore Sight Rifle |
$10.00 |
| Sight In Rifle (Doesn't
include cost of ammo or targets) |
$30.00 |
| Scope Mounting- Rifle
or Scope Purchase from us |
N/C |
| Scope Mounting- Brought
In |
$22.00 |
| Check Headspace |
$10.00 |
| Check Firing Pin
Protrusion |
$10.00 |
| Make Chamber Cast |
$25.00 |
| Remove Stuck Case or
Bullet from Chamber or Barrel (Price is dependent upon severity of problem). |
POR |
| Cut Dovetail in Barrel |
$35.00 |
| Drill & Tap Barrel
or Receiver for Sights or Scope Base (Per Hole) |
$15.00 |
| Install Front Sight
Ramp - Sweat-On Type |
$50.00 |
| Install Front Sight
Ramp - Screw-On Type |
$30.00 |
| Install Liner in Barrel |
$100.00 |
| Install Pre-Threaded
& Chambered Barrel to Action |
$100.00 |
| Chamber & Fit
Barrel to Action - Std. Caliber's |
$150.00 |
| Chamber & Fit
Barrel to Action - Win. Pre-64 70 |
$180.00 |
| Chamber & Fit
Barrel to Action - Wildcat Caliber's |
$220.00 |
| Turn & True
Receiver Face |
$25.00 |
| Turn & True
Receiver Locking Lugs & Bolt Locking Lugs |
$60.00 |
| Lap Locking Lugs to 600
grit polish |
$45.00 |
| Crown & Lap Muzzle |
$50.00 |
| Thread Muzzle, Contour
& Install Muzzle Brake |
$90.00 |
| Thread Protector for
Muzzle Brake (Contoured to Barrel Dia.) |
$45.00 |
| Weld on New Bolt Handle |
$85.00 |
| Forge Bolt Handle |
$85.00 |
| Install & Adj.
Timney/Canjar/Shilen Trigger |
$30.00 |
| Install & Adj.
Double or Single Set Trigger |
$60.00 |
| Install Safety - Mark
II / Beuhler Type |
$30.00 |
| Install Safety - Win.70
style in bolt shroud |
$90.00 |
Metal Finishing
Bluing
Bluing consists of
Disassembly, Cleaning, Removing old blue and rust, Polishing, Bluing, Oiling, and
Reassembling of gun.
| Description |
Price |
| Matte Finish - Soft or
Heavy (Polish out Pitting with 140 polish, Bead Blast) |
$125.00 |
| Standard Finish -
(Polish out Pitting, Finish with 140 polish) |
$125.00 |
| Deluxe Finish - (As
above followed with 240 & 400 polish) |
$165.00 |
| Master Finish - (As
above followed with 500 & 555 polish to a mirror finish) |
$200.00 |
| Parkerizing - (Polish
out Pitting, Finish with 140 & Bead Blast |
$125.00 |
| Stainless Steel Blue - (Add
to normal steel blue cost) |
$60.00 |
| Baking Lacquer /
Teflon-Moly Finish |
$150.00 |
Other Finishing
Hard
Chrome - (Price depending on number of pieces) |
POR |
| Case Coloring - (Price
depending on number of pieces) |
POR |
| Stainless Steel
Finishing - Matte |
$40.00 |
| Stainless Steel
Finishing - Deluxe |
$60.00 |
| Stainless Steel
Finishing - Master |
$90.00 |
| Strip Nickel Finish |
$70.00 |
| Draw Filing |
$65.00 |
| Jewel Bolt |
$65.00 |
| Jewel Follower |
$40.00 |
- Stock Work
-
Stock Finishes
include stripping the old finish, sanding to 400 grit, raising the grain between grits,
and sealing the stock.
Description |
Price |
| Standard
Stock Finish - (Unfilled oil, Satin) |
$100.00 |
| Deluxe
Stock Finnish - (Filled, Hand Rubbed Oil in Satin or Gloss) |
$150.00 |
| Spray
Lacquer or Polyurethane- (Gloss) |
$100.00 |
| Black
Wrinkle Paint Finish |
$100.00 |
| Glass Bed
and Free Float Barrel - (Std. Hunting Rifle) |
$100.00 |
| Glass Bed
and Free Float Barrel - (Benchrest & Match Rifles, etc) |
$150.00 |
| Pillar Bed
and Free Float Barrel |
$150.00 |
| Inletting
Semi-Finished Stock |
$100.00 |
| Pre-Finished
Syn. Stock - (Fit & Install Bbl.Action) |
$75.00 |
| Install
Recoil Pad |
$40.00 |
| Install
Adj. Butt Plate |
$90.00 |
| Install
Sling Swivel Studs |
$30.00 |
| Install
Stock Cross Bolt |
$50.00 |
| Recut
Checkering - (Per Panel) |
$40.00 |
| Checkering
- (By the Hour, Priced by complexity of pattern) |
POR |
Because of unforeseen complications, many prices could be
higher than those shown.
Base Prices as of 8/31/98
Prices subject to change without notice.
|
Copyright 1995-2008 Hatcher Gun Company